Protective Coatings & Primers

Professional primers for structural steel & corrosion control.

The foundation of every coating system. Zinc-rich, pure epoxy and etch primers from Jotun — engineered to extend asset life by decades.

Steel beams coated with Jotun protective primer system
Why It Matters

Unprotected steel corrodes.

In industrial environments, corrosion isn't a cosmetic issue — it's a structural problem. Rust weakens steel, causes equipment failure and leads to expensive downtime. The right primer system prevents this by acting as a barrier between steel and moisture.

A cheap primer might save money upfront but fail in 2–3 years. A professional-grade system like Jotun's zinc-rich or pure epoxy primers can protect for 10, 15, even 20 years.

20+ Years

Typical service life of a properly applied primer + topcoat system.

80–120µm

Standard dry film thickness per coat for zinc-rich primers.

SP3 / SP6

Surface prep standards we'll help you specify for the job.

The Range

Our protective coating families.

Jotun BARRIER zinc-rich primer can

BARRIER 80 / RESIST 86

Zinc-Rich

High-performance zinc-rich epoxy primers for structural steel in aggressive environments. The zinc particles provide cathodic protection, while the epoxy resin delivers excellent adhesion and chemical resistance — the industry standard for fabrication shops, bridges and offshore.

ApplicationsStructural steel, fabrication, bridges, offshore platforms, automotive undercarriage

DFT
80–120µm
Dry time @23°C
16 hrs
Jotun JOTACOTE / PENGUARD primer can

JOTACOTE F60 / PENGUARD

Pure Epoxy

Solvent-based pure epoxy primers offering superior adhesion and moisture resistance. JOTACOTE F60 is engineered for cryogenic service down to −196°C; PENGUARD is the versatile two-component primer used across industrial maintenance.

ApplicationsCryogenic, industrial maintenance, storage tanks, piping, structural steel

Dry time
7–16 hrs
Service temp
−196°C → +80°C
Jotun JOTA-ETCH primer can

JOTA-ETCH

Etch Primer

A single-component wash primer that chemically etches the steel surface for exceptional adhesion on blast-cleaned or hand-cleaned steel. Perfect for shop primers and urgent maintenance work where blast access is limited.

ApplicationsShop primers, touch-ups, urgent maintenance, hand-prepped steel

Dry time
4–6 hrs
Coverage
≤ 15 m²/L

How to Choose

For most structural steel, start with BARRIER 80 or RESIST 86 — they deliver the best all-round protection. For cryogenic work, JOTACOTE F60 is essential. For urgent repairs and minimal surface prep, JOTA-ETCH is the answer. Not sure? Send us your spec and we'll recommend the system.

FAQ

Common questions on primers.

Zinc-rich primers (BARRIER 80, RESIST 86) contain zinc particles that provide cathodic protection — ideal for aggressive environments and structural steel. Pure epoxy primers (JOTACOTE, PENGUARD) have no zinc but offer superior adhesion and moisture resistance. Choose zinc-rich for maximum corrosion protection; choose pure epoxy for specific applications like cryogenic or immersion.
Ready to Order

Need industrial paint? Talk to us today.

Same-day pickup on R59. Next-day delivery to the Vaal Triangle & JHB South. Expert technical support included.